Note: Mirror coatings are esthetic only. Performance of any given lens is determined by its base color.
Vermillion: This color provides the best contrast in low light conditions. It also preserves your night vision by preventing the bleaching of "Rhodopsin" a pigment located amongst the rods and cones on your retina. This is an excellent color for multiple sporting applications but is especially effective for skiing on overcast days or when the light is "flat". Non-polarized.
Grey & Grey/Blue Flash: This is our ultimate neutral density lens delivering true color transmission for those times when you want to see the world as it really is; colorful and non-distorted. When combined with our Tri-Oxide™ multi-layer coatings, polarization and mirrors, transmissions will range from 12-14%.
Clear: When maximum visible light transmission is required. Non-polarized.
Persimmon: This color walks a thin line between a neutral lens color and a contrast which improves depth perception. Known for its reddish orange tint, it is an excellent choice for those who consider vermillion to be too “bright”.
How to install a goggle replacement lens
Goggle Lens/Shield Removal & Installation Instructions
Removal
· Separate lens from frame along the top of the goggle.
· Work your way from the top along the sides and down to the nose piece.
· Carefully wiggle the lens from the retention posts around the nose area using care not to tear the retention posts.
Installation
· Your Haber replacement lens has a protective film covering the inside lens surface. This must be removed before use. (On single or flat lenses there may be a film on both sides of the lens.) Peel back the film 1 inch on each side of the lens but don’t completely remove it yet.
· Start by inserting the lens into the nose area and making sure it is completely secure in its retaining posts. This centers the lens in the frame so the other retention posts line up.
· Work the lens into the frame by working up one side and then the other and finishing at the top. Make sure the lens snaps into the retention posts at the top of the goggle.
· Reach inside the goggle and peel the film off the lens. This should leave a finger print proof finish on the inside lens surface.
Instructions to try on Haber eyewear with your mobile device.